Yoosee
Menu
Yoosee
FAQ > Failed to add camera
Press the Reset on the camera for 5-10 seconds, it will give a voice tone of “Reset successful” or sharp noise if resetting successfully.
If there is no response after resetting the camera for several times, please contact the seller to return to the factory to repair.
（1）Restart the router and mobile, reset the device and re-add.
（2）Confirm the WIFI can be connected to the Internet stably.
Confirmation method: after connecting to WiFi, open the website with 4G network turned off. Ensure that you can surf online normally.
（3）Change the internet and re-add the camera.
If there is no other WIFI to change, use mobile hot-spot as the router, reset the device and then re-add.
（1）Confirm the camera has been reset successfully (Press Reset more than 10 seconds)
（2）Confirm the camera support “Fast networking” .
Confirmation methods: when the camera gives voice tone of connecting camera via “Fast networking” or “AP connection”, it means that the camera supports “Fast networking”, otherwise, Please change other methods to connect.
（3）Confirm the APP has opened the location permission (GPS permission)
（4）Confirm that you have set up according to the above operations. If the issue still exists, please try other connection methods.
（1）Confirm the camera is reset successfully.( Long press Reset more than 10 seconds)
（2）Confirm the mobile WIFI is the same with the one connected by the camera.
（3）Delete the added cameras in the APP.
（4）Confirm the APP has opened the location permission(GPS permission)
（5）Restart the mobile and APP to search the camera.
（6）Confirm that you have set up according to the above operations. If the issue still exists, please contact the seller to return to the factory to repair.
（1）Delete the added cameras in the APP.
（2）Restart the router and reset the camera to re-add
（3）If the the problem still exists, you shall connect the camera with wire or change the network to re-add.
